View MUBW35-12E7_1286070.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Advanced Technical Information
MUBW 35-12 E7
Converter - Brake - Inverter Module (CBI2)
NPT3-IGBT
21 D11 D13 D15
22 D7 T1 7 16 15 6 D2 T2 D1 D3 T3 D5 T5 NTC 8 4 D6 T6 9
18 17
20 19
1 D12
2 D14
3 D16
5 D4 T4
14
T7
11 10
12
13
23
24
Three Phase Rectifier V RRM = 1600 V I FAVM = 42 A I FSM = 300 A
Brake Chopper
Three Phase Inverter
VCES = 1200 V VCES = 1200 V IC25 = 35 A IC25 = 52 A VCE(sat) = 2.3 V VCE(sat) = 2.2 V
Application: AC motor drives with
Input Rectifier Bridge D11 - D16 Symbol VRRM IFAV IDAVM IFSM Ptot TC = 80C; sine 180 TC = 80C; rectangular; d = 1/3; bridge TVJ = 25C; t = 10 ms; sine 50 Hz TC = 25C Conditions Maximum Ratings 1600 30 80 300 100 V A A A W
* * * *
Input from single or three phase grid Three phase synchronous or asynchronous motor electric braking operation
Features * High level of integration - only one power semiconductor module required for the whole drive * Inverter with NPT3 IGBTs - low saturation voltage - positive temperature coefficient - fast switching - short tail current * Epitaxial free wheeling diodes with Hiperfast and soft reverse recovery * Industry standard package with insulated copper base plate and soldering pins for PCB mounting * Temperature sense included
Symbol
Conditions
Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. 1.2 1.2 0.4 1.4 0.02 V V mA mA
VF IR RthJC
IF = 35 A; TVJ = 25C TVJ = 125C VR = VRRM; TVJ = 25C TVJ = 125C (per diode)
1.3 K/W
IXYS reserves the right to change limits, test conditions and dimensions.
(c) 2002 IXYS All rights reserved
1-4
228
Advanced Technical Information
MUBW 35-12 E7
Output Inverter T1 - T6 Symbol VCES VGES IC25 IC80 ICM VCEK tSC (SCSOA) Ptot Conditions TVJ = 25C to 150C Continuous TC = 25C TC = 80C RBSOA; VGE = 15 V; RG = 39 ; TVJ = 125C Clamped inductive load; L = 100 H VCE = 900 V; VGE = 15 V; RG = 39 ; TVJ = 125C non-repetitive TC = 25C Maximum Ratings 1200 20 52 36 50 VCES 10 225 V V A A A s W
Equivalent Circuits for Simulation
Conduction
D11 - D16 Rectifier Diode (typ. at TJ = 125C) V0 = 0.83 V; R0 = 11 m T1 - T6 / D1 - D6 IGBT (typ. at VGE = 15 V; TJ = 125C) V0 = 0.95 V; R0 = 45 m Free Wheeling Diode (typ. at TJ = 125C) V0 = 1.26V; R0 = 15 m T7 / D7 IGBT (typ. at VGE = 15 V; TJ = 125C) V0 = 1.37 V; R0 = 62 m Free Wheeling Diode (typ. at TJ = 125C) V0 = 1.39 V; R0 = 56 m
Symbol
Conditions
Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. 2.2 2.5 4.5 0.4 200 150 60 700 50 4.2 3.5 2 250 2.8 6.5 0.4 V V V mA mA nA ns ns ns ns mJ mJ nF nC 0.55 K/W
VCE(sat) VGE(th) ICES IGES td(on) tr td(off) tf Eon Eoff Cies QGon RthJC
IC = 35 A; VGE = 15 V; TVJ = 25C TVJ = 125C IC = 1 mA; VGE = VCE VCE = VCES; VGE = 0 V; TVJ = 25C TVJ = 125C VCE = 0 V; VGE = 20 V Inductive load, TVJ = 125C VCE = 600 V; IC = 35 A VGE = 15 V; RG = 39
Thermal Response
VCE = 25 V; VGE = 0 V; f = 1 MHz VCE = 600V; VGE = 15 V; IC = 35 A (per IGBT)
D11 - D16 Rectifier Diode (typ.) Cth1 = 0.106 J/K; Rth1 = 1.06 K/W Cth2 = 0.79 J/K; Rth2 = 0.239 K/W T1 - T6 / D1 - D6
Output Inverter D1 - D6 Symbol IF25 IF80 Conditions TC = 25C TC = 80C Maximum Ratings 50 33 A A
IGBT (typ.) Cth1 = 0.201 J/K; Rth1 = 0.419 K/W Cth2 = 1.25 J/K; Rth2 = 0.131 K/W Free Wheeling Diode (typ.) Cth1 = 0.116 J/K; Rth1 = 0.973 K/W Cth2 = 0.879 J/K; Rth2 = 0.217 K/W T7 / D7 IGBT (typ.) Cth1 = 0.156 J/K; Rth1 = 0.545 K/W Cth2 = 1.162 J/K; Rth2 = 0.155 K/W Free Wheeling Diode (typ.) Cth1 = 0.043 J/K; Rth1 = 2.738 K/W Cth2 = 0.54 J/K; Rth2 = 0.462 K/W
Symbol VF IRM trr RthJC
Conditions IF = 35 A; VGE = 0 V; TVJ = 25C TVJ = 125C IF = 30 A; diF/dt = -500 A/s; TVJ = 125C VR = 600 V; VGE = 0 V (per diode)
Characteristic Values min. typ. max. 2.8 1.8 27 150 V V A ns 1.19 K/W
(c) 2002 IXYS All rights reserved
2-4
Advanced Technical Information
MUBW 35-12 E7
Brake Chopper T7 Symbol VCES VGES VGEM IC25 IC80 ICM VCEK tSC (SCSOA) Ptot Symbol Conditions TVJ = 25C to 150C Continuous Transient TC = 25C TC = 80C RBSOA; VGE = 15 V; RG = 82 ; TVJ = 125C Clamped inductive load; L = 100 H VCE = VCES; VGE = 15 V; RG = 82 ; TVJ = 125C non-repetitive TC = 25C Conditions Maximum Ratings 1200 20 30 35 25 35 VCES 10 180 V V V A A A s W
Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. 2.3 2.6 4.5 0.8 200 100 75 500 70 3.1 2.4 1000 70 3 6.5 0.8 V V V mA mA nA ns ns ns ns mJ mJ pF nC 0.7 K/W
VCE(sat) VGE(th) ICES IGES td(on) tr td(off) tf Eon Eoff Cies QGon RthJC
IC = 20 A; VGE = 15 V; TVJ = 25C TVJ = 125C IC = 0.6 mA; VGE = VCE VCE = VCES; VGE = 0 V; TVJ = 25C TVJ = 125C VCE = 0 V; VGE = 20 V
Inductive load, TVJ = 125C VCE = 600 V; IC = 20 A VGE = 15 V; RG = 82
VCE = 25 V; VGE = 0 V; f = 1 MH z VCE = 600V; VGE = 15 V; IC = 20 A
Brake Chopper D7 Symbol VRRM IF25 IF80 Symbol VF IR IRM trr RthJC Conditions TVJ = 25C to 150C TC = 25C TC = 80C Conditions IF = 20 A; TVJ = 25C TVJ = 125C VR = VRRM; TVJ = 25C TVJ = 125C IF = 20 A; diF/dt = -400 A/s; TVJ = 125C VR = 600 V Maximum Ratings 1200 16 11 V A A
Characteristic Values min. typ. max. 3.6 2.6 0.06 0.07 13 110 V V mA mA A ns 3.2 K/W
(c) 2002 IXYS All rights reserved
3-4
Advanced Technical Information
MUBW 35-12 E7
Temperature Sensor NTC Symbol R25 B25/50 Module Symbol TVJ TJM Tstg VISOL Md Symbol Rpin-chip dS dA RthCH Weight Dimensions in mm (1 mm = 0.0394") Creepage distance on surface Strike distance in air with heatsink compound 6 6 0.02 180 IISOL 1 mA; 50/60 Hz Mounting torque (M5) Conditions Conditions Maximum Ratings -40...+150 150 -40...+125 2500 2.7 - 3.3 C C C V~ Nm Conditions T = 25C Characteristic Values min. typ. max. 4.75 5.0 3375 5.25 k K
Characteristic Values min. typ. max. 5 m mm mm K/W g
(c) 2002 IXYS All rights reserved
4-4
023

▲Up To Search▲

Price & Availability of MUBW35-12E7

	To Download MUBW35-12E7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .